Dozens more goods have been excluded from the additional 25 percent duty imposed on some $34 billion worth of imports from China (List 1 goods). These exclusions cover one HTSUS subheading and 88 specially prepared product descriptions and reflect about 464 separate exclusion requests.

The exclusions will be retroactive to July 6, 2018, and remain in place until June 4, 2020. They must be claimed using new HTSUS subheading 9903.88.10.

Importers should review the list of affected goods (see below for general overview and attached notice for full details) and apply for refunds of any tariffs paid on such goods since July 6, 2018. The exclusions are available for any product that meets the specified product description, regardless of whether the importer filed an exclusion request. The scope of each exclusion is governed by the scope of the product descriptions set forth in the attached notice and not by the product descriptions in any particular request for exclusion.

For more information on Section 301 tariffs, including exclusions and how to apply for duty refunds, please contact trade consultant Nicole Bivens Collinson at (202) 730-4956 or trade attorney Kristen Smith at (202) 730-4965.

- HTSUS 8537.10.8000 (touch-sensitive data input devices (touch screens) without display capabilities)

- parts of non-aircraft gas turbines (HTSUS 8411.99.9085)

- oil well and oil field crank-balanced, long-stroke, and beam pumps (HTSUS 8413.50.0010)

- radial piston hydraulic fluid pumps (HTSUS 8413.50.0070)

- submersible pumps, centrifugal pumps, and sump pumps (HTSUS 8413.70.2004)

- non-submersible centrifugal pumps (HTSUS 8413.70.2005)

- centrifugal pumps designed for eliminating condensate (HTSUS 8413.70.2090)

- water pump housings and impellers (HTSUS 8413.91.9010)

- hydraulic pump positioning piston assemblies and plastic reservoirs for motor vehicle brake master cylinders (HTSUS 8413.91.9060)

- air-end assemblies, inlet guide vanes, air-ends, compressor baseplates, and backplates (HTSUS 8414.90.4190)

- stand-alone icemaking machines (HTSUS 8418.69.0110)

- non-compressor coolers and assemblies of thermo-electric modules (HTSUS 8418.69.0180)

- solar water heaters (HTSUS 8419.19.0040)

- distillation and rectifying equipment (HTSUS 8419.40.0080)

- heat exchanger plates, cores, finned tubes, cones, shells, bonnets, flanges, and baffles (HTSUS 8419.90.3000)

- cast steel and steel structural forms designed for use in filtering machines (HTSUS 8421.99.0080)

- steel and cast steel parts of air filtering machines or apparatus (HTSUS 8421.99.0080)

- self-propelled forklift and platform trucks (HTSUS 8427.10.8090)

- garage door opener/closers, hinged steel transfer machinery, rotating benches, and rotating fork machines (HTSUS 8428.90.0290)

- vibratory, self-propelled tamping machines, each with drum roller (HTSUS 8429.40.0020)

- new, track-mounted hydraulic backhoes or hydraulic shovels (HTSUS 8429.52.1010)

 - pile drivers, diesel powered (HTSUS 8430.10.0000)

- conveyor belt parts (HTSUS 8431.39.0010)

- feed pushers, bale forks, scrapers, and frames therefor (HTSUS 8431.49.9010)

- rolling mills (HTSUS 8455.22.0000)

- double row ball bearings (HTSUS 8482.10.5060)

- needle roller bearings (HTSUS 8482.40.0000)

- outer bearing rings (HTSUS 8482.99.0500)

- bearing shields (HTSUS 8482.99.6595)

- coupling covers, including center members, flanged hubs, sleeves, and shoes (HTSUS 8483.90.8010)

- AC multi-phase motors fitted with pulleys and brakes to raise and lower passenger elevators (HTSUS 8501.53.8040)

- speed drive controllers for electric motors (HTSUS 8504.40.4000)

- printed circuit assemblies for telecommunication apparatus (HTSUS 8504.90.6500)

- radio transceivers for installation in motor vehicles (HTSUS 8525.60.1050)

- antennas of base metal and fiberglass (HTSUS 8529.10.4040)

- projector parts (HTSUS 8529.90.9900)

- electromechanical relays other than automotive flashers (HTSUS 8536.41.0050)

- push-button switches (HTSUS 8536.50.9035)

- push-pull switches (HTSUS 8536.50.9065)

- bullet connectors, butt connectors, closed-end butt connectors, crimp connectors, insulated tab electrical connectors, tab receptacle electrical connectors, junction blocks, lug connectors, ring connectors, spade connectors, spring clip (alligator clip) terminals, terminal blocks, and wiretap connectors (HTSUS 8536.90.4000)

- magnesium anodes (HTSUS 8543.30.9040)

- disposable brain monitoring sensor patches, stainless steel subdermal needle electrodes, and surface electrodes (HTSUS 9018.19.9560)

- machines for testing the hardness of metals (HTSUS 9024.10.0000)

View Document(s):

Copyright © 2022 Sandler, Travis & Rosenberg, P.A.; WorldTrade Interactive, Inc. All rights reserved.

Practice Areas

ST&R: International Trade Law & Policy

Since 1977, we have set the standard for international trade lawyers and consultants, providing comprehensive and effective customs, import and export services to clients worldwide.

View Our Services 


Cookie Consent

We have updated our Privacy Policy relating to our use of cookies on our website and the sharing of information. By continuing to use our website or subscribe to our publications, you agree to the Privacy Policy and Terms & Conditions.